Only order if the option Safe single-axis disconnect of servo drive modules has been selected
The KSD for slot 4 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate). With MPL B, C and D, drive modules KSD1-08 to KSD1-32 can be selected for slot 4.
The KSD for slot 5 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate). With MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 5.
Basic configuration
Use of a heat exchanger is sufficient with an external temperature of up to 45 °C. The option Cooling unit for top-mounted cabinet must be selected for operation in ambient temperatures of up to 50 °C or if the cabinet is subjected to high levels of radiated heat. For the additional cooling, separate cooling units must be ordered for the basic cabinet and the top-mounted cabinet! Ordering information A Cooling unit for top-mounted cabinet must be ordered if a cooling unit is used in the basic cabinet.
