The KSD for slot 1 must be determined. The possible size of the KSD depends on the mounting plate
(MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 1.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 1.
For the titan version, a selection of servo drives (KSD) is not required. The required KDSs are already
included in the Drive Configuration 23 for Product Family KR 1000 titan.

The KSD for slot 1 must be determined. The possible size of the KSD depends on the mounting plate
(MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 1.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 1.
For the titan version, a selection of servo drives (KSD) is not required. The required KDSs are already
included in the Drive Configuration 23 for Product Family KR 1000 titan.

The KSD for slot 1 must be determined. The possible size of the KSD depends on the mounting plate
(MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 1.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 1.
For the titan version, a selection of servo drives (KSD) is not required. The required KDSs are already
included in the Drive Configuration 23 for Product Family KR 1000 titan.

Single Brake Modules (SBMs) are used for the option Safe single-axis disconnect of servo drive modules.
Ordering information / limitations
The following ordering data for SBMs (Single Brake Modules) are only relevant if the option Safe single-axis disconnect of servo drive modules is selected.
Please note: If Safe single-axis disconnect of servo drive modules is selected, it must be used for all external axes (both in the top-mounted cabinet and in the basic cabinet). A mixed configuration (e.g. A7
in failsafe technology, A8 standard) is not possible!

The KSD for slot 2 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected.
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 2.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 2.

The KSD for slot 2 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected.
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 2.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 2.

The KSD for slot 2 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected.
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 2.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 2

The KSD for slot 2 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected.
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 2.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 2.

The KSD for slot 2 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected.
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 2.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 2.

Only order if the option Safe single-axis disconnect of servo drive modules has been selected

The KSD for slot 3 must be determined. The possible size of the KSD depends on the mounting plate
(MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 3.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 3.

If applicable, please select the required KSD (taking into consideration the constraints of the selected mounting plate)

The KSD for slot 3 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 3.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 3.

If applicable, please select the required KSD (taking into consideration the constraints of the selected mounting plate)

The KSD for slot 3 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 3.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 3.

If applicable, please select the required KSD (taking into consideration the constraints of the selected mounting plate)

The KSD for slot 3 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 3.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 3.

If applicable, please select the required KSD (taking into consideration the constraints of the selected mounting plate)

The KSD for slot 3 must be determined. The possible size of the KSD depends on the mounting plate (MPL) that has been selected (see also the illustration under Top-mounted cabinet incl. mounting plate).
With MPL A and MPL D, drive modules KSD1-08 to KSD1-64 can be selected for slot 3.
With MPL B and MPL C, drive modules KSD1-08 to KSD1-32 can be selected for slot 3.

If applicable, please select the required KSD (taking into consideration the constraints of the selected mounting plate)