To simplify transportation, fork slots and/or sets of rollers are mounted directly on the cabinet.

the rollers, which allow the cabinet to be maneuvered easily, are available in two sizes 75mm and 125mm diameter).

Ordering information

To simplify transportation, fork slots and/or sets of rollers are mounted directly on the cabinet.
The rollers, which allow the cabinet to be maneuvered easily, are available in two sizes
(75 mm and 125 mm diameter

Ordering information
If a transformer with underslung box is used, the fork slots and rollers are already integrated and
need not be selected here!

To simplify transportation, fork slots and/or sets of rollers are mounted directly on the cabinet.
The rollers, which allow the cabinet to be maneuvered easily, are available in two sizes
(75 mm and 125 mm diameter).
Ordering information
If a transformer with underslung box is used, the fork slots and rollers are already integrated and
need not be selected here!

To simplify transportation, fork slots and/or sets of rollers are mounted directly on the cabinet.

the rollers, which allow the cabinet to be maneuvered easily, are available in two sizes 75mm and 125mm diameter).

Ordering information

To simplify transportation, fork slots and/or sets of rollers are mounted directly on the cabinet.

the rollers, which allow the cabinet to be maneuvered easily, are available in two sizes 75mm and 125mm diameter).

Ordering information

The service socket serves as a power source for test and diagnosis equipment.
In the “upstream of main switch” variants, the sockets are active even when the main power switch is
turned off. An N-conductor must also be connected.
In the “from transformer” variants, the sockets are only active if the main power switch is turned on.
A ground-fault circuit interrupter must be selected if plant regulations or regulations of the power utility
concerned stipulate that a ground-fault circuit interrupter is required for socket-outlet circuits.
The ground-fault circuit interrupters are tripped by residual currents of 10 mA.
The socket must not be used as a permanent power source for external devices.

 

The service socket serves as a power source for test and diagnosis equipment.
In the “upstream of main switch” variants, the sockets are active even when the main power switch is
turned off. An N-conductor must also be connected.
In the “from transformer” variants, the sockets are only active if the main power switch is turned on.
A ground-fault circuit interrupter must be selected if plant regulations or regulations of the power utility
concerned stipulate that a ground-fault circuit interrupter is required for socket-outlet circuits.
The ground-fault circuit interrupters are tripped by residual currents of 10 mA.
The socket must not be used as a permanent power source for external devices.

The service socket serves as a power source for test and diagnosis equipment.
In the “upstream of main switch” variants, the sockets are active even when the main power switch is
turned off. An N-conductor must also be connected.
In the “from transformer” variants, the sockets are only active if the main power switch is turned on.
A ground-fault circuit interrupter must be selected if plant regulations or regulations of the power utility
concerned stipulate that a ground-fault circuit interrupter is required for socket-outlet circuits.
The ground-fault circuit interrupters are tripped by residual currents of 10 mA.
The socket must not be used as a permanent power source for external devices.

The service socket serves as a power source for test and diagnosis equipment.
In the “upstream of main switch” variants, the sockets are active even when the main power switch is
turned off. An N-conductor must also be connected.
In the “from transformer” variants, the sockets are only active if the main power switch is turned on.
A ground-fault circuit interrupter must be selected if plant regulations or regulations of the power utility
concerned stipulate that a ground-fault circuit interrupter is required for socket-outlet circuits.
The ground-fault circuit interrupters are tripped by residual currents of 10 mA.
The socket must not be used as a permanent power source for external devices.
 

The control cabinet can be fitted with a cabinet interior lamp.
The “cabinet interior lamp AC 230 V before main switch” is active even when the main power switch is
turned off.
If the cabinet is supplied with power from a transformer or a 24 V power supply, the lamp is only active
when the main switch is turned on.
The lamp is turned on and off by means of a door switch.

The control cabinet can be fitted with a cabinet interior lamp.
The “cabinet interior lamp AC 230 V before main switch” is active even when the main power switch is
turned off.
If the cabinet is supplied with power from a transformer or a 24 V power supply, the lamp is only active
when the main switch is turned on.
The lamp is turned on and off by means of a door switch.

The control cabinet can be fitted with a cabinet interior lamp.
The “cabinet interior lamp AC 230 V before main switch” is active even when the main power switch is
turned off.
If the cabinet is supplied with power from a transformer or a 24 V power supply, the lamp is only active
when the main switch is turned on.
The lamp is turned on and off by means of a door switch.

Various covers are available to protect the connector panel at the bottom of the control cabinet

Various covers are available to protect the connector panel at the bottom of the control cabinet.

Various covers are available to protect the connector panel at the bottom of the control cabinet