Various covers are available to protect the connector panel at the bottom of the control cabinet.

To simplify transportation, fork slots and/or sets of rollers are mounted directly on the cabinet.

the rollers, which allow the cabinet to be maneuvered easily, are available in two sizes 75mm and 125mm diameter).

Ordering information

if a transformer with underslung box is used, the fork slots and rollers are already integrated  and  need not be selected here

To simplify transportation, fork slots and/or sets of rollers are mounted directly on the cabinet.

the rollers, which allow the cabinet to be maneuvered easily, are available in two sizes 75mm and 125mm diameter).

Ordering information

The option Cooling unit is required for operation of the KR C2 control cabinet in ambient temperatures of up to 50 °C or if the cabinet is subjected to high levels of radiated heat.
The cooling unit is maintenance-free and does not require a filter.
It is installed on the right-hand side of the cabinet; dimensions: 810 mm x 400 mm x 170 mm.

Ordering information / limitations
-The option is only to be used with the basic cabinet and does not cool the top-mounted cabinet.
For the top-mounted cabinet, the Cooling unit for top-mounted cabinet must be used.
-The option can be used with all the cabinets described in the Product Catalog.
 

The option Cooling unit is required for operation of the KR C2 control cabinet in ambient temperatures of up to 50 °C or if the cabinet is subjected to high levels of radiated heat.
The cooling unit is maintenance-free and does not require a filter.
It is installed on the right-hand side of the cabinet; dimensions: 810 mm x 400 mm x 170 mm.

Ordering information / limitations
-The option is only to be used with the basic cabinet and does not cool the top-mounted cabinet.
For the top-mounted cabinet, the Cooling unit for top-mounted cabinet must be used.
-The option can be used with all the cabinets described in the Product Catalog.

 

The mounting plate is installed on the inside of the cabinet door underneath the PC.
The detachable base plate offers the customers installation space for their special components.
Installation dimensions
height: 290 mm, width: 400 mm, depth: 180 mm
Weight of installed equipment
The maximum total weight of all installed equipment must not exceed 5 kg.
Power dissipation
The maximum total power dissipation of all installed equipment must not exceed approx. 20 W.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

If the 24 V / 30 A power supply unit is used, max. 10 A
If the 24 V / 40 A power supply unit is used, max. 20 A